Order A Knife 2

 

Interested in placing an order?

Click below for more details and current wait times.

Ordering Info

H1 Hudson Bay Camp Knife


Hand forged full tang 1095 High Carbon Steel.   Blade Size about  8”  Handle size about 5”. Spine Tang about: 3/16” thick .  Pattern aged finish blade, clean finish, or pattern and patina aged finish. Brass pins over brass washers (vintage style) Price with Hand stitched Sheath in Tiger Maple, Aged Black walnut, antiqued hickory, antiqued Osage $425.00 plus shipping.  Antiqued  elk stag $505.00 plus shipping

PLACE ORDER
All Hudson Bay Camp Knives are 3/16" Full tang 1095 high carbon steel, All Hudsons include a hand stitched fold over (High Ride) belt sheath with fold over loop and full welt.
Please be sure of initials, letter or numbers you want these can't be changed once order is place.
All tooling and artwork is done freehand each will be unique and different from the last.
Please be sure of initials or name you want, these can't be changed once order is placed.
Please add full billing address with zip code.
If you have more than one phone number or alternative number just type it next to the first one.

hudsonbaycampknifeh1swepttigermaplesheathmlknives

H1 Hudson Bay Camp Knife with tiger maple handle. Pattern aged blade. $425.00 Plus shipping

hudsonbaycampknifeh1sweptantiquedosagepatternandpatinamlknives

H1 Hudson Bay Camp Knife with antiqued osage handle. Pattern and patina aged blade. $425.00 Plus shipping

hudsonbaycampknifeblackwalnut

H1 Hudson Bay Camp Knife with aged black walnut handle. Pattern and patina aged blade. $425.00 Plus shipping

 Hudson Bay Archival photos


I made three knives for the movie entitled The Revenant staring Leonardo DiCaprio and Tom Hardy. One of which was the large mountain skinner below and two were the vintage spear point knives that follow. If you would like to order similar knives place order tabs are under the description of each below.revmovie

The Mountain Skinner

Hand forged form 1095 high carbon steel. Blade size is about 5 1/2″ long. Handle size is about 4 3/8″. Spine/tang is 1/8″ thick.  Dark Vintage high aged blade. Handle material aged black walnut with 3 steel pins.  Blade is at least 1 3/4″ wide at widest point. Knife comes with a high aged and distressed leather belt sheath. Special “R” stamp on opposing side of my makers stamp. Price $495.00 plus shipping. 

PLACE ORDER
All Mountain Skinner's are 1/8" full tang 1095 high carbon steel with 3 steel pins. All Mountain Skinners include a hand stitched high aged and distressed leather belt sheath.
Please add full billing address with zip code.
If you have more than one phone number or alternative number just type it next to the first one.
Revenant2017

 


The Vintage Spear Point

Hand forged from 1095 high carbon steel. Blade size is about 4 1/8″. Handle size about 4 1/4″. 1/8″ thick spine/tang. Dark Vintage Aged Blade. Handle material aged black walnut with 3 steel pins. Knife comes with a high aged and distressed leather belt sheath. Special “R” stamp on opposing side of my makers stamp.Price $295.00 plus shipping

PLACE ORDER
All Vintage Spear Points are 1/8" full tang 1095 high carbon steel with 3 steel pins. All vintage spear points include a hand stitched high aged and distressed leather belt sheath.
Please add full billing address with zip code.
If you have more than one phone number or alternative number just type it next to the first one.

Movieknivesspearpoint


ML Knives Trail Fighter Knife


Hand forged full tang 1095 High Carbon Steel.   Blade Size about   6 1/4”  Handle size about 5”. File worked thumb stops on spine.  Rear Exposed steel But end.  Tapered forward swedge clip about 3″ long.  Spine Tang about: 3/16” thick .  Pattern and patina aged finish blade. Handle material is black canvas micarta or black walnut.  Brass pins and lanyard hole.  Price with Hand stitched “Trail Fighter” Snap Sheath (Sheath can be worn in regular hanging fashion or higher on the belt.  EACH blade is number stamped.   $399.00 plus shipping. **BLACK DYMONDWOOD NO LONGER AVAILABLE**

PLACE ORDER
These are base prices, All standard Trail Fighters are 3/16" full tang 1095 high carbon steel, Rear Exposed steel But end. Tapered forward swedge clip about 3″ long. 3 brass pin and lanyard hole comes on the Trail Fighter. If you choose standard file work It will replace the file worked thumb stops that come on the Trail Fighter. All Trail Fighters include a hand stitched "Trail Fighter" snap sheath with fold over loop and full welt. Each Trail Fighter is number stamped.
Choosing a sheath above will replace the standard "Trail Fighter" snap hand stitched sheath the knife comes with.
All tooling and artwork is done freehand each will be unique and different from the last.
Please be sure of initials or name you want, these can't be changed once order is placed.
Please add full billing address with zip code.
If you have more than one phone number or alternative number just type it next to the first one.

 

WD SET:  Drop Point Woods Set.  Great design for the hunter or woods runner


Hand forged full tang 1095 High Carbon Steel.   Blade Size about  4”  Handle size about 4 1/8”. Spine Tang about: 1/8” thick .  Tiger Maple handle with brass pins.  Pattern and patina aged finish blade, Hand forged Fire steel and antler Ferro rod. Price with Hand stitched Sheath $295.00 plus shipping

PLACE ORDER
These are base prices, All Drop point woods set are 1/8" full tang 1095 high carbon steel with 3 pins. Hand forged Fire steel and antler Ferro rod. For additional options such as lanyard hole and file work check below. All Drop point woods sets include a hand stitched pancake style sheath with ferro rod and steel loops and fold over loop and full welt.
Lanyard hole will replace last pin.
Please be sure of initials, letter or numbers you want these can't be changed once order is place.
Choosing a sheath above will replace the standard hand stitched fold over the knife comes with.
All tooling and artwork is done freehand each will be unique and different from the last.
Please be sure of initials or name you want, these can't be changed once order is placed.
Please add full billing address with zip code.
If you have more than one phone number or alternative number just type it next to the first one.
droppointwoodsset2017

droppointwoodssetsheath2017

droppointwoodsetlanyardmlknives

Drop point woods set shown with pattern and patina aged blade, lanyard hole and tiger maple Handle.


 EVD Carry Knife:  Great every day carry knife, handy for game hunting, woods use, skinner.  All around nice design


Hand forged full tang 1095 High Carbon Steel.   Blade Size about  2”  Handle size about 3 1/4”. Spine Tang about: 3/32” thick . Pattern and patina aged finish blade, pattern aged or clean finish.  Tiger Maple handle, aged black walnut  with brass or steel pins. Price with Hand stitched Sheath $129.00 plus shipping.  Lanyard hole option $134.00 plus shipping.

PLACE ORDER
These are base prices, All EVD Carry knives are 3/32" full tang 1095 high carbon steel with 3 pins, for additional options such as lanyard hole and file work check below. All EVD carry knives include a hand stitched fold over belt sheath with fold over loop and full welt.
Choosing a sheath above will replace the standard hand stitched fold over the knife comes with.
All tooling and artwork is done freehand each will be unique and different from the last.
Please be sure of initials or name you want, these can't be changed once order is placed.
Please add full billing address with zip code.
If you have more than one phone number or alternative number just type it next to the first one.

everydaycarryknifetigermaplemlknives

Carry Knife shown with Tiger Maple handle.

everydaycarryknifewithlanyardholemlknives

Carry Knife shown with aged black walnut and lanyard hole.


  CC3:  Short Hunter (Caper style)

Hand forged full tang 1095 High Carbon Steel.   Blade Size about   3 1/8”  Handle size about 3 1/4”. Spine Tang about: 1/8” thick . Pattern and patina aged finish blade, pattern aged or clean finish.  Tiger Maple handle, aged black walnut, antiqued hickory with brass or steel pins. Price with Hand stitched Sheath $149.00 plus shipping.  Lanyard hole option 154.00 plus shipping.

PLACE ORDER
These are base prices, All standard short hunter's are 1/8" full tang 1095 high carbon steel with 2 pins, for additional options such as lanyard hole and file work check below. All short hunter capers include a hand stitched fold over belt sheath with fold over loop and full welt.
Please be sure of initials, letter or numbers you want these can't be changed once order is place.
Choosing a sheath above will replace the standard hand stitched fold over the knife comes with.
All tooling and artwork is done freehand each will be unique and different from the last.
Please be sure of initials or name you want, these can't be changed once order is placed.
Please add full billing address with zip code.
If you have more than one phone number or alternative number just type it next to the first one.

customcapertigermaplepatinafileworkmlknives

Short Hunter “Caper” Shown with tiger maple, pattern and patina aged blade. File worked spine. This version is $174.00 plus shipping. If no file work is wanted $149.00 plus shipping. 

shorthuntercaperpatternandpatinaantiquedhickorywithfileworkmlknives

Short Hunter “Caper” Shown with antiqued hickory, pattern and patina aged blade. File worked spine. This version is $174.00 plus shipping. If no file work is wanted $149.00 plus shipping. 


STGH:  Stag hunting and field knives

Hand forged full tang 1095 High Carbon Steel.   4″ to 4 1/4″ Blade lengths, clean blade, pattern aged, pattern and patina. Handle of Elk stag. Brass or steel pins. Either style with a hand stitched sheath $295.00 plus shipping. Lanyard hole can be added for $5.00 more. 

PLACE ORDER
These are base prices, All stag hunting and field knives are 1/8" full tang 1095 high carbon steel with 3 pins, for additional options such as lanyard hole and file work check below. All stag hunting and field knives include a hand stitched fold over belt sheath with fold over loop and full welt.
Please be sure of initials, letter or numbers you want these can't be changed once order is place.
Choosing a sheath above will replace the standard hand stitched fold over the knife comes with.
All tooling and artwork is done freehand each will be unique and different from the last.
Please be sure of initials or name you want, these can't be changed once order is placed.
Please add full billing address with zip code.
If you have more than one phone number or alternative number just type it next to the first one.

staghuntingandfieldknivesmlknives

Each piece of stag takes on it’s own character, each will be individual and unique from the last.


A32:  Frontier Style Belt Knife

Hand forged full tang 1095 High Carbon Steel.   Blade Size about  5 1/2”  Handle to balance.  Spine Tang about: 3/16” thick . Pattern and patina aged finish blade, Tiger Maple handle, aged black walnut, antiqued hickory with brass or steel pins. File worked spine. Price with Hand stitched Sheath $395.00 plus shipping.  Lanyard hole option add $5.00 (Knife is designed after an early style belt knife)

PLACE ORDER
These are base prices, All Frontier belt knives are 3/16" full tang 1095 high carbon steel with 5 pins, for additional options such as lanyard hole check below. Frontier belt knives come with my standard file work. All Frontier belt knives include a hand stitched fold over belt sheath with fold over loop and full welt.
Please be sure of initials, letter or numbers you want these can't be changed once order is place.
Choosing a sheath above will replace the standard hand stitched fold over the knife comes with.
All tooling and artwork is done freehand each will be unique and different from the last.
Please be sure of initials or name you want, these can't be changed once order is placed.
Please add full billing address with zip code.
If you have more than one phone number or alternative number just type it next to the first one.

A32blackwalnutwithlanyard


 H7:  Special Edition hand jigged hunting Skinner

Hand forged full tang 1095 High Carbon Steel.   Blade Size about   3 7/8”  Handle about 4 3/16″ long.  Spine Tang about: 1/8” thick . Pattern aged finish blade. 2 Large brass  pins and brass lanyard.  File worked spine. Price with Hand stitched Sheath $285.00 plus shipping. 

PLACE ORDER
These are base prices, All H7: Special Edition hand jigged hunting skinners are 1/8" full tang 1095 high carbon steel with 2 large brass pins and lanyard hole. H7: Special Edition comes with my standard file work. For additional options check below. All H7: Special Edition's include a hand stitched fold over belt sheath with fold over loop and full welt.
Please be sure of initials, letter or numbers you want these can't be changed once order is place.
Choosing a sheath above will replace the standard hand stitched fold over the knife comes with.
All tooling and artwork is done freehand each will be unique and different from the last.
Please be sure of initials or name you want, these can't be changed once order is placed.
Please add full billing address with zip code.
If you have more than one phone number or alternative number just type it next to the first one.

Specialeditionhandjighornhandlehuntermlknives

**Beautiful Hand Jig carved black horn handle, these are all individual and unique from the last. I hand jig these myself.


SHRTSURV:  Short Survivalist

 This is a handy blade profile..Great design for Everyday Carry knife, Pocket, Pack, shooting bag and can be set up as a Neck Knife as well. Hand forged full tang 1095 High Carbon Steel. Blade length 3″ Handle 3 1/4″ Rear Steel Lanyard hole. File worked thumb stops.  Pattern aged finish, Pattern and patina or clean finish.  Handle material Tiger maple. Steel or Brass Pins.  Price with Hand stitched multi carry sheath Price $169.00

PLACE ORDER
These are base prices, All standard short survivalist's are 1/8" full tang 1095 high carbon steel with 2 pins and rear steel lanyard hole. Full handled short survivalists are 1/8" full tang 1095 high carbon steel with 3 pins and lanyard hole. Both come with file worked thumb stops, if standard file work is chosen it will replace the thumb stops. For additional options check below. All short survivalist's include a hand stitched multi carry belt sheath with high ride belt loop and full welt as well as 2 holes for neck carry option.
Please be sure of initials, letter or numbers you want these can't be changed once order is place.
Choosing a sheath above will replace the multi carry sheath that the knife comes with.
All tooling and artwork is done freehand each will be unique and different from the last.
Please be sure of initials or name you want, these can't be changed once order is placed.
Please add full billing address with zip code.
If you have more than one phone number or alternative number just type it next to the first one.

shortsurvivalisttigermaplehandlemlknives

Short survivalist shown with pattern and patina aged blade. Tiger maple handle.GreenCamotigermapleshortsurvivalist2017

Short survivalist shown with pattern and patina aged blade. Green (Camo) Tiger Maple.

Multi carry neck or belt sheath

fullhandleshortsurvivalistgreencanvasmicartamlknives

Full Handle Green canvas Micarta Short Survivalist: 4″ handle 3″ blade. Hand forged full tang1095 High Carbon Steel. Pattern aged finish. Brass Pins and rear lanyard. file worked thumb stops. Price with Hand stitched multi carry sheath $199.00 plus shippingfullhandledshortsurvivalistMLKNIVES2016

Full Handle Tiger Maple Short Survivalist. Hand forged full tang 1095 High Carbon Steel. Beefed up 3/16″ spine. Pattern and patina aged finish. Steel Pins and rear lanyard. Leather braided lanyard. File worked thumb stops.  Price with Hand stitched multi carry sheath $268.00 plus shippingfullhandledshortsurvivalistbeefedupspineMLKNIVES2016

Full handled short survivalist shown with Beefed up 3/16″ spine. 


Wood Carver/Whittler

PLACE ORDER
These are base prices, All wood carvers are 3/32" full tang 1095 high carbon steel with 2 pins, for additional options check below. A leather slip cover can also be added. This knife does not come with a sheath.
Please add full billing address with zip code.
If you have more than one phone number or alternative number just type it next to the first one.

fulltangcarvermlknives

Blade length about 2″ Handle 4 1/2″. Clean hand rubbed satin finish. 3/32 spine thickness is rounded a bit for a more comfortable feel on the thumb. $99.00 Plus shipping. Add $8.00 for a hand stitched leather blade cover.


Custom Ferro RodsFerrorodsMLKNIVES

 

Custom Ferro rods made to match your knife handle. These are a great backup rod to go on your sheath. Rods are 5/16″ Made with tiger maple, aged black walnut antiqued hickory. for $35.00 plus shipping …Antler rods are $29.00 plus shipping