Available Knives

 The “For Sale” section is updated several times a week…Keep checking back for available buy now knives.

 

 

Game and Carry Knife with Antiqued Hickory

 Excellent knife for hunting, fresh water fish, camp cooking. Carry everyday . Forged from 1095 high carbon steel. Unique patina aged blade. Handle is hard grained antiqued hickory with 2 mid sized brass pins. Blade width about 3/4″ at widest point. Spine/tang 1/8″ tapering to tip and sharp enough for ferro rod use. File worked deep grooved thumb stop. Handle length about 3 13/16″. Blade about 3 3/8″ with a flatter ground profile. Overall about 7 5/16″. Hand stitched, antiqued leather belt sheath. Will fit a belt up to 2″. Sheath is signed and dated on backside. $189.00 Plus Shipping  **SOLD**

 


Spear Point Trail Knife with High Grained Tiger Maple

Excellent knife for hunting, fishing, and trail use. Nice finger grooved handle. Forged from 1095 high carbon steel. Pattern and patina aged blade. Beautiful high grained tiger maple handle with 3 brass pins and brass lined rear lanyard hole. Blade width about 1 3/8″  at widest. Spine/Tang 1/8″ thick tapering to tip and sharp enough for ferro rod use.  Handle length about 4 1/2″. Blade  about 3 9/16″, convex ground with a 3 1/2″cutting edge. Overall about 8 1/8″. Hand stitched, antiqued leather belt sheath. Will fit a belt up to 2 1/4″. Sheath is signed and dated on backside. $235.00 Plus Shipping **SOLD**


Bush and Hunting Knife with Antiqued Curly Birch

Excellent knife for hunting, skinning, woods and bushcraft. Forged from 1095 high carbon steel. Pattern aged blade. Hard grained antiqued Curly Birch handle with 3 brass pins and brass lined rear lanyard hole. Nice semi-ball end grip. Spine/tang 1/8″ thick tapering to tip and sharp enough for ferro rod use. Blade width is about 1 1/16″ at widest. Handle about 4 1/8″. Blade about 4 5/16″,convex ground. Overall about 8 11/16″. Hand stitched, antiqued leather belt sheath. Will fit a belt up to 2 1/2″ wide. Sheath is signed and dated on backside. $225.00 Plus Shipping**SOLD**

 


Vintage Style Trade Knife with High Aged Maple

Excellent early style knife. Has the look and feel of a knife used many years ago. Trade knives were very common and used everyday for many tasks. This knife was forged from 1095 high carbon steel and has a nice patina aged finish. Spine/tang is about 1/8″ thick tapering to tip and is slotted back into the high aged and distressed Maple handle. Spine has very nice Hammer work on both top and bottom sides. Handle has 2 Hammer peened copper pins. Blade width is about 1 3/8″ at widest point.Handle length is about 4 3/8″. Blade  is about 4 7/8″, convex ground and sharpened from tip to hilt. Overall 9 5/16″ Hand stitched, antiqued and distressed leather belt sheath with unique coloring and scalloped throat. Will fit a belt up to 2 1/2″. Sheath is signed and dated on backside. $295.00 Plus Shipping **SOLD**


Hunting, Skinner Carry Knife with Antiqued Stag

Excellent knife for hunting, skinning. Carry Every day. Forged from 1095 high carbon steel. Pattern and patina aged blade. Beautiful antiqued elk stag handle with 2 brass pins. Spine/tang1/8″ thick tapering to tip and sharp enough for ferro rod use. Blade width about 1 1/4″ at widest point. Handle length  about 3 1/2″ long. Blade about 3 7/16″, convex ground and sharpened from tip to hilt. Overall about 7″. Hand stitched, antiqued and distressed leather belt sheath. Will fit a belt up to 2 1/4″. Sheath is signed and dated on backside. $269.00 Plus Shipping **SOLD**


Straight Back Classic with Aged Black Walnut

Excellent knife design. Great for hunting, woodland trail use. Forged from 1095 high carbon steel. Pattern aged blade. Beautiful hard grained aged black walnut handle with 3 steel pins. Blade width about 1 1/4″ wide at widest point. Spine/tang 1/8″ thick tapering to tip and sharp enough for rod use. Handle length about 4 1/16″. Blade about 4 3/16″, convex ground with a 4 1/16″ cutting edge. Overall about8 1/4″. Hand stitched, antiqued leather belt sheath. Will fit a belt up to 2 1/4″. Sheath is signed and dated on backside. $225.00 Plus Shipping**SOLD**


Woods and Hunters Spear Point with High Grained Tiger Maple

Beautiful traditional style spear point, will be a great knife for hunting, skinning, bush craft and more. Forged from 1095 high carbon steel. Pattern and patina aged blade. Beautiful hard grained tiger maple handle with 2 brass pins and brass lined rear lanyard hole. Beautiful high grain maple. Spine/tang 1/8″ thick tapering to tip and sharp enough for ferro rod use. Blade width about 1 1/4″ at widest. Handle length about 4 5/16″ long. Blade about 3 15/16″, convex ground. Overall about 8 1/4″. Hand stitched, antiqued leather belt sheath. Will fit a belt up to 2 1/2″. Sheath is signed and dated on backside. $249.00 Plus Shipping**SOLD**


Camp & Woods Knife with Aged, Distressed Walnut

*Has the look and feel of a smaller Hudson Bay* Beautiful vintage style knife with a beefed up 3/16″ spine & early style clip blade. Forged from 1095 high carbon steel. Pattern and patina aged blade. Beautiful aged black walnut handle that has been distressed by hand. 3 brass pins peened over brass washers. Spine/tang sharp enough for ferro rod use. Blade width about 1 5/8″ at widest point. Handle length about 4 1/2″. Blade about 4 1/2″, convex ground and sharpened from tip to hilt. Overall about 9″. Hand stitched, antiqued leather belt sheath. Will fit a belt up to 2 1/2″. Sheath is signed and dated on backside. $349.00 Plus Shipping **SOLD**


Hunting Skinner, Field Knife with Antiqued Elk Stag

Excellent knife for hunting, skinning,  field work. Nice Classic style clip point. Forged from 1095 high carbon steel. Pattern and patina aged blade. Beautiful antiqued elk stag handle with 3 brass pins. Handle has a nice substantial feel. Spine/tang 1/8″ thick tapering to tip and sharp enough for ferro rod use. Blade width 1 7/16″ at widest point. Handle length about 3 7/8″. Blade about 3 15/16″, cutting edge. Overall about 7 7/8″. Hand stitched, antiqued leather belt sheath. Will fit a belt up to 2 1/4″. Sheath is signed and dated on backside . $289.00 Plus Shipping**SOLD**


Trail and Hunting Knife with Birdseye Maple

Excellent knife for hunting, skinning, woods and trail use. Nice deep grooved file work thumb stops on spine. Forged from 1095 high carbon steel. Pattern aged blade. Beautiful hard grained antiqued Birdseye Maple handle with 2 large brass pins and brass lined rear lanyard hole. Spine/tang 1/8″thick tapering to tip and sharp enough  for ferro rod use. Blade width about 1 5/16″ at widest point. Blade about 3 15/16″ long, convex ground and sharpened from tip to hilt. Overall about 8 1/8″. Hand stitched, antiqued and distressed leather belt sheath. Will fit a belt up to 2 1/4″. Sheath is signed and dated on backside. $259.00 Plus Shipping**SOLD**


Bush and Hunting Knife with High Grain Tiger Maple

Excellent knife in the field for for hunting, skinning, woods and trail use. Beautiful feeling bird beak grip. Forged from 1095 high carbon steel. Pattern and patina aged blade. Beautiful hard grained tiger maple handle with 4 brass pins. Super high grain handle. Spine/tang 1/8″ thick tapering to tip and sharp enough for ferro rod use. Blade width about 1 3/16″ at widest point. Handle length about 4 3/8″. Blade about 4 1/4″, convex ground with about a 4 3/16″ cutting edge. Overall about 8 5/8″ long. Hand stitched antiqued leather belt sheath. Will fit a belt up to 2 1/2″. Sheath is signed and dated on backside. $259.00 Plus Shipping **SOLD**


Game and Carry knife with Antiqued Elk Stag

Great small carry and game knife. Excellent to carry everyday for daily tasks, zipping fresh water fish, small game, patch knife. Forged from 1095 high carbon steel. Pattern and unique patina aged blade. Beautiful antiqued elk stag handle with 2 brass pins. Blade width about 3/4″ wide. Spine/tang 1/8″ thick tapering to tip and sharp enough for ferro rod use. Handle length about 3 1/8″ long. Blade about 2 7/8″ long, convex ground. Overall about 5 1/2″. Hand stitched, antiqued leather belt sheath. Will fit a belt up to 1 3/4″ wide. Sheath is signed and dated on backside. $149.00 Plus Shipping **SOLD**


Drop Point Trail Knife with Aged Black Walnut

Excellent timeless design. Will be great for hunting, skinning, and carry. Nice finger grooved handle. Forged from 1095 high carbon steel. Pattern and patina aged blade. Beautiful hard grained aged black walnut handle with 3 brass pins. Brass lined rear lanyard hole. Blade width about 1 1/2″ at widest point. Spine/tang 1/8″ thick tapering to tip and sharp enough for ferro rod use. Handle length about 4 3/8″. Blade about 3 5/8″, convex ground with a 3 3/8″ cutting edge. Overall about 8″. Hand stitched, antiqued leather belt sheath. Will fit a belt up to 2 1/4″. Sheath is signed and dated on backside. Tooled line design down side of sheath and backside. $225.00 Plus shipping **SOLD**


Hunting/Skinner Carry Knife. Smooth Moose Stag.

Excellent knife for hunting, skinning, carry everyday. Forged from 1095 high carbon steel. Blade has my cross forged pattern and light patina finish. Beautiful smooth antiqued moose stag with 3 steel pins. Spine/tang 1/8″ thick tapering to tip and sharp enough for ferro rod use. Blade width about 1 7/16″at widest. Handle length about 3 5/8″. Blade about 3 1/2″, convex ground with a 3 5/16″ cutting edge. Overall about 7 1/8″. Hand stitched, antiqued and distressed leather belt sheath. Will fit a belt up to 2 1/4″. Sheath is signed and dated on backside. $279.00 **SOLD**


Drop Point Woods and Trail Knife with Curly Red Oak

Excellent knife for many uses. Great for hunting, skinning, wood and trail use. Forged from 1095 high carbon steel. Pattern and patina aged blade. Beautiful hard grained curly red oak handle with 1 mosaic pin and brass lined rear lanyard hole. Spine/tang 1/8″thick tapering to tip and sharp enough for ferro rod use. Blade width about 1 7/16″ at widest. Handle length about 4 13/16″. Blade about 3 1/4″, convex ground sharpened from tip to hilt. Overall about 7″ long. Hand stitched antiqued leather belt sheath. Will fit a belt up to 2″ wide. Sheath is signed and dated on backside. $219.00 Plus shipping **SOLD**


Carry Skinner & Hunter with Antiqued Elk Stag 

Excellent knife to carry everyday, hunting, skinning. Blade has a nice shape. Forged from 1095 high carbon steel. Pattern and patina aged blade. Beautifully antiqued elk stag handle with 2 brass pins. Spine/tang 1/8″ thick tapering to tip and sharp enough for ferro rod use. Blade width about 1 7/16″ at widest point. Handle length about 3 3/16″. Blade about 3 3/16″, convex ground and sharpened from tip to hilt. Overall about 6 3/8″. Hand stitched, antiqued leather belt sheath. Will fit a belt up to 2″ wide. Sheath is signed and dated on backside. $249.00 Plus Shipping **SOLD**


 

Mountain Bush Hunter with High Grain Tiger Maple

 Excellent knife for hunting, skinning, woods and trail use. Forged from 1095 high carbon steel. Pattern and patina aged blade. Gorgeous high grained tiger maple handle with 2 mid sized pins and rear brass lined lanyard hole. Nice finger grooved handle. Spine/tang 1/8″ thick tapering to tip and sharp enough for ferro rod use. Blade width about 1 3/16″ at widest point. Handle length about 4 5/8″ long. Blade about 4 5/8″, convex ground with a 4 1/2″ cutting edge. Overall about 9 1/4″ long. Hand stitched, antiqued leather belt sheath. Will fit a belt up to 2 1/2″. Sheath is signed and dated on backside. $295.00 Plus shipping **SOLD**


Hunting/Skinner and Carry knife with Antiqued Stag

Excellent traditional style clip point, will be a great hunting and skinning knife. Carry on your side daily. Forged from 1095 high carbon steel. Pattern and patina aged blade. Beautiful antiqued elk stag handle with 3 brass pins. Spine/tang 1/8″thick tapering to tip and sharp enough for ferro rod use. Blade width about 1 1/4″ at widest point. Handle length about 3 15/16 long. Blade about 3 3/4″, convex ground and sharpened from tip to hilt. Overall about 7 5/8″ long. Hand stitched, antiqued leather belt sheath. Will fit a belt up to 2″. Sheath is signed and dated on backside. $289.00 Plus shipping  **SOLD**


Bush and Hunting knife with Tiger Maple

Excellent knife for hunting, bushcraft, great for making firesticks. Nice drop point tip on the blade. Forged from 1095 high carbon steel. Pattern aged blade. Beautiful hard grained tiger maple handle with 2 large brass pins and brass lined rear lanyard hole. Spine/tang 1/8″ tapering to tip and sharp enough for ferro rod use. Blade width about 13/16″ at widest point. Handle length about 4 1/4″. Blade length about 3 1/2″, convex ground. Overall about 7 7/8″. Hand stitched antiqued leather belt sheath.Will fit a belt up to 2″. Sheath is signed and dated on backside.  $219.00 plus shipping  **SOLD**


Hunting and Carry Knife with Figured Cherry

Excellent knife for many uses. Hunting, skinning, woods and trail work. Great to carry everyday as well. Forged from 1095 high carbon steel. Pattern aged blade. Beautiful hard grained figured cherry handle with 4 brass pins and bird beak style grip. Spine/tang 1/8″ thick tapering to tip and sharp enough for ferro rod use. Blade width about 1 7/16″ at widest point. Handle length about 3 7/8″. Blade about 3 3/8″, convex ground and sharpened from tip to hilt. Overall about 7 5/16″. Hand stitched, antiqued leather belt sheath. Will fit a belt up to 1 5/8″wide. Sheath is signed and dated on backside. Unique hand, tooled and carved scroll and vine work on face of sheath. $225.00 plus shipping **SOLD**


Nessmuk With Aged Black Walnut

Excellent traditional style nessmuk. *Rare to have one ready to ship.* Has more of a rounded hump than my standard muk. Forged from 1095 high carbon steel. Pattern and patina aged blade. Beautiful hard grained aged black walnut handle with 4 steel pins. Spine/tang 1/8″ thick tapering to tip, sharp enough for ferro rod use. Blade width about 1 5/8″at widest point. Handle length is about 4 1/8″ long. Blade about 4 1/4″, convex ground with a 4 1/4″ cutting edge. Overall about 8 3/8″. Hand stitched, antiqued and distressed high ride cross draw style sheath. Will fit a belt up to 2 1/4″. Sheath is signed and dated on back side. $259.00 Plus shipping **SOLD**


Woods Drop Point Forged from a Farriers Rasp. Antiqued Red Oak

Excellent knife for many uses, from hunting to woods work. Forged from a high carbon farriers rasp.  Pattern from rasp and Patina aged blade. Beefed up  3/16″ spine tapering to tip and sharp enough for ferro rod use. Beautiful hard vintage red oak with 2 large brass pins and brass lined rear lanyard hole. Blade width about 1 1/4″  at widest point. Handle length about 3 15/16″ long. Blade about 3 11/16″long, convex ground with a cutting edge. Overall about 7 5/8″. Hand stitched, antiqued leather belt sheath. Will fit a belt up to 2 1/4″. Sheath is signed and dated on backside $239.00 Plus Shipping  **SOLD**


Hunting/Skinner Carry Knife with Antiqued Elk Stag

Excellent knife for hunting, skinning, carry. Forged from 1095 high carbon steel. Pattern and patina aged blade. Beautiful antiqued elk stag handled with 3 brass pins. Spine/tang 1/8″ thick tapering to tip and sharp enough for ferro rod use. Blade width about 1 1/4 at widest. Handle length about 3 3/4″. Blade about3 5/16″,convex ground and sharpened from tip to hilt. Overall about 7 1/8″ long. Hand stitched, antiqued and distressed leather belt sheath. Will fit a belt up to 2″. Sheath is signed and dated on back side. $279.00 plus shipping **SOLD**


Hunting and Trail knife with Burl Gum wood

Excellent drop point design. Would be great in the woods for hunting, bushcraft, skinning. Forged from 1095 high carbon steel. Pattern aged blade. Beautiful burl gum wood handle with 2 mid sized brass pins lined rear lanyard hole. Spine/tang 1/8″ thick tapering to tip and sharp enough for ferro rod use. Blade width about 1 1/8 “at widest. Handled length about 4 1/8″. Blade about 3 15/16″, convex ground with a 3 3/4″ cutting edge. Overall about 8 1/16”. Hand stitched, antiqued leather belt sheath. Will fit a belt 2 1/4″ wide. Sheath is signed and dated on back side. $249.00 plus shipping **SOLD**


Classic Style Straight Back With Tiger Maple

Excellent knife for many uses. From field and game use to bushcraft. Traditional straight back design with a slight swept tip. Forged from 1095 high carbon steel. Pattern aged blade. Beautiful hard grained tiger maple handle with 3 brass pins. Spine/ tang 1/8″ thick taping to tip and sharp enough for ferro rod use. Blade width about 7/8″ at widest point. Handle length is  about 4 1/16″  long. Blade about 4 1/16 ” long, convex ground with a 3 15/16″ cutting edge. Overall about 8 1/8″. Hand stitched antiqued leather belt sheath. Will fit a belt up to 2″. Sheath is signed and dated on backside. Hand tooled and carved vine work on face of sheath. $219.00 plus shipping **SOLD**


Field Hunting/Skinner. Antiqued Stag.

Excellent knife for hunting and skinning. Slimmer 3/32″ spine for slightly lighter profile. Forged from 1095 high carbon steel. Pattern and unique patina aged blade. Beautiful antiqued elk stag handle with 3 brass pins. Blade width about 1 1/2″ at widest point. Handle length about 4 3/16″ long. Blade about 3 7/8″, convex ground and sharpened from tip to hilt. Overall about 8 1/8″. Hand stitched, antiqued leather belt sheath. Will fit a belt up to 2 1/4″. Sheath is signed and dated on backside. $295.00 plus shipping  **SOLD**


Trail Hunter/Woods knife. Antiqued Birds Eye Maple.

Excellent design for hunting, skinning, woods and trail use. Forged from 1095 high carbon steel. Pattern and unique patina aged blade. Beautiful antiqued birds eye maple handle with 2 brass pins and brass lined rear lanyard hole. Nice birds beak grip. Spine/tang 1/8″ thick tapering to tip and sharp enough for ferro rod use. Blade width about 1 1/2″ at widest point. Handle length about 4 1/8″ long. Blade about 3 3/8″, convex ground and sharpened from tip to hilt. Overall about 7 5/8″. Hand stitched, antiqued leather belt sheath. Will fit a belt up to 2″. Sheath is signed and dated on backside. $229.00 plus shipping **SOLD**


Vintage Style Game & Trail knife with Antiqued Red Oak VintageStyleGameandTrailKnife1

Excellent knife design. Will be great in the field for hunting, fresh water fish. Excellent in the kitchen or camp cooking. Forged from 1095 high carbon steel. Pattern and unique patina aged blade. Spine/tang 1/8″ thick tapering to tip and sharp enough for ferro rod use. Beautiful hard grained antiqued red oak handle with 2 large brass pins and brass lined rear lanyard hole. Blade width about 7/8″ at widest point. Handle length about 4 1/4″ long. Blade about 4″ with a  flatter grind. Overall about 8 1/4″ long. Hand stitched, antiqued leather belt sheath. Will fit a belt up to 2 1/4″. Sheath is signed and dated on backside. $219.00 plus shipping **SOLD**


MORE RECENTLY SOLD…

You May also Like…

Fold Over Woodsman Pouch Pocket and Pack Tin $24.95

Oil Tan Drawstring Pouch $12.00

fullhandledshortsurvivalistmlknives2016-1

Full Handled Short Survivalist Order a knife 2 Starting at $189.00

mlknivescustomkniveskephartknifeagedblackwalnut

Kephart knives Order a Knife Starting at $249.00

Woodsman Cross Stitched Leather Fold Over $29.00